Connecting the Conductivity probe
To connect the Conductivity probe to the Mantis Unit, you will need the Mantis Unit powered ON and the Conductivity probe. Make sure no other sensors are plugged into the blue colored port on the Mantis Unit.
Step 1 – Locate the blue colored port for the Mantis Unit.
Step 2 – Locate the alignment arrow on the Conductivity probe connection end.
Step 3 – Gently connect the Conductivity sensor to the blue colored port on the Mantis Unit with the alignment arrow aligned correctly with the sensor port. Make sure the pins and index arrow are correctly aligned, as damage may occur if the connectors are not aligned properly.
Step 4 – Firmly connect the Conductivity sensor to the blue colored port on the Mantis Unit when the alignment has been achieved. The Conductivity sensor is now ready to be used to collect your data!