Connecting the pH probe
To connect the pH probe to the Mantis Unit, you will need the Mantis Unit powered ON and the pH probe. Make sure no other sensors are plugged into the green colored port on the Mantis Unit.
Step 1 – Locate the green colored port for the Mantis Unit.
Step 2 – Locate the alignment arrow on the pH probe connection end.
Step 3 – Gently connect the pH sensor to the green colored port on the Mantis Unit with the alignment arrow aligned correctly with the sensor port. Make sure the pins and index arrow are correctly aligned, as damage may occur if the connectors are not aligned properly.
Step 4 – Firmly connect the pH sensor to the green colored port on the Mantis Unit when the alignment has been achieved. The pH sensor is now ready to be used to collect your data!