SupportCategory: Mantis PlatformHow do I connect the Temperature Probe to the Mantis SIP?
Support Staff asked 3 years ago
1 Answers
mantis Staff answered 3 years ago

Connecting the Temperature probe
To connect the Temperature probe to the Mantis Unit, you will need the Mantis Unit powered ON and the Temperature probe. Make sure no other sensors are plugged into the blue colored port on the Mantis Unit.
Step 1 – Locate the blue colored port for the Mantis Unit.
mantis-sip-front-view2
Step 2 – Locate the alignment arrow on the Temperature probe connection end.
PICT0033
Step 3 – Gently connect the Temperature sensor to the blue colored port on the Mantis Unit with the alignment arrow aligned correctly with the sensor port. Make sure the pins and index arrow are correctly aligned, as damage may occur if the connectors are not aligned properly.
mantis-sip-blue-connector-unplugged2
Step 4 – Firmly connect the Temperature sensor to the blue colored port on the Mantis Unit when the alignment has been achieved. The Temperature sensor is now ready to be used to collect your data!
mantis-sip-blue-connector-plugged-in2

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt