SupportCategory: Mantis AppHow do I pair my Sensor Wand to the Mantis app?
Support Staff asked 3 years ago
1 Answers
mantis Staff answered 3 years ago

How do I pair my Sensor Wand to the Mantis app?
To use the Mantis sensors you will need to download the Mantis app!
banner
Once you have downloaded the Mantis app, you can follow the instructions below!
One of the most exciting aspects of the Mantis platform is the ability to grab a sensor, start the Mantis app, and begin recording data for any number of real life scenarios.
The first step in starting an ad-hoc experiment is to tap on the Browse or Start your own Experiment tile found on the Mantis app home page.
7
The next step is to tap the Start my own experiment button.
11
The Mantis app will present you with a list of the sensors available to use for your ad-hoc experiment. Tap the sensor you would like to use for gathering the information for your experiment.  For this experiment we have decided to use the Sensor Wand.
selecting-the-sensor-wand-from-menu
You can now select the sensor that you would like to use with the Sensor Wand.
sensor-wand-sensor-select

  • Turn on the sensor by pressing the button

The Mantis app will present you with the pairing screen before you can get started collecting data.  Tap the green pair button located on the main navigation bar.
sensor-wand-pair

  • Press and hold the button for 1 sec to activate the pairing mode so that the sensor is discover-able by your phone/tablet device
    sensor-wand-bottom-front-view-wmu
    The Mantis app will now display that the Sensor Wand has been paired and is ready to start displaying data as well as collect the data when you are ready to do so.
    The ad-hoc experiment page will be presented with the data streams showing on the left side sensor panel actively displaying sensor data.  You are now ready to use your Sensor Wand!  If you would like to un-pair the device you can simply tap the un-pair button located on the left side of the main navigation bar.
    unpair-sensor-wand
    In the event your device does not pair successfully with the Mantis app, the No Device Found screen will be shown.  Make sure you have the Sensor Wand powered on and tap the Scan Again button.  The Mantis app will again scan for your device.  If you still cannot pair to your Sensor Wand, you may want to power everything down and reopen the app and start again.
    no-devices-found

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt